|
|
 |
 |
 |
|
 |
| Products >Twinax Connectivity >e-TwinPrint |
|
 |
|
|
| |
Reverse Protocol Converter (RPC) Supporting Single
Twinax Printers
|
| |
Overview
|
| |
| The e-TwinPrint, a reverse protocol converter (RPC), enables workhorse SCS and IPDS printers in remote locations to be supported and managed easily via a Web browser. Protect your Twinax printer investment, even as you move the rest of your organization to a LAN environment, with this SNA-free, pure TCP/IP RPC. |
 |
|
| |
Advantages
|
| |
 |
Configured and managed remotely via a Web browser, eliminating the requirement to use a PC on the same LAN with configuration and management software installed |
| |
Permits IT staff to handle problems directly, without having to talk an end user on location through complex diagnostics |
| |
Supports initial setup via a dumb terminal, an advantage when the device is located in a small remote site without a PC |
| |
Automatically creates printer device description on the host |
| |
Does not use AnyNet or MPTN (does not use SNA!) |
| |
Upgradeable to support 3 or 10 devices (including Terminals) with software key |
| |
DHCP or Static IP |
| |
Supports most popular e-Twin@x ControllerTM features, such as encrypted connection over the Internet using SECURIT-e ServerTM, Hot Backup, Dial Backup, System Backup, DNS to IP address resolution, etc.* |
| * For more information on these features, please visit our e-Twin@x Controller site. |
|
| |
Technical Specifications |
| |
Printers Supported |
| |
Supports all Twinax printers (both SCS and IPDS). |
| |
Important Note Regarding IPDS Printers: The PSF/400 option must be installed on the host for the e-TwinPrint to be able to work with IPDS printers. When configuring any IP-attached IPDS printer in the e-TwinPrint Configurator, the AFP parameter in the device description must be set to *YES. Because the e-TwinPrint works as pure TCP/IP controller, the IPDS printer attached to the e-TwinPrint will also be configured as an IP-attached printer. In this case the e-TwinPrint emulates the behavior of the network printer against the AS/400. As a result, the e-TwinPrint always creates the printer device description with AFP(*YES). This configuration environment requires that PSF/400 (Print Services Facility for AS/400) be installed on the host. For more information about PSF/400, visit http://www.printers.ibm.com/R5PSC.NSF/Web/4psf400.
Note: Starting with OS/400 V4R4, PSF/400 is a licensed option that must be purchased separately from IBM. |
| |
Host System Requirements |
| |
OS/400 V3R2 or higher |
| |
For device naming and SCS printing functionality the correct PTF must be installed. |
| |
Ethernet LAN connection |
Physical Specifications |
| |
Electrical: Universal input 100v- 240v, 0.6A, 50/ 60Hz |
| |
Width: 17.4" / 44.1 cm; with brackets: 19" / 48.3 cm |
| |
Height: 1.64" / 4.16 cm (1U) |
| |
Depth: 9.8" / 25 cm |
| |
Weight: 5.1 lbs / 2.3 kg |
Ordering Information |
| 4691 |
e-TwinPrint Reverse Protocol Converter, for single Twinax printer device |
|
| |
|
| |
|
| |
 Click here to download a product brochure in PDF format |
| |
|
| |
|
| |
|
|
|
|
 |
|
